Home > ELISA KIT > Rat Elisa Kit > Rat Interleukin 1beta ELISA Kit

Rat Interleukin 1beta ELISA Kit

Rat Interleukin 1beta ELISA Kit
Total $289

Product Summary

Alias:Interleukin 1beta, IL-1beta

NO.:SL0402Ra

Wavelength:450nm

Assay range:1pg/ml-80pg/ml

Sensitivity:0.1pg/ml

Standard:108pg/ml

Sample Volume:10ul

    Number:

Details

Rat Interleukin 1 beta (IL-1β) ELISA Kit — Catalogue Number SL0402Ra

Intended use

This kit is intended for the quantitative determination of rat interleukin 1 beta (IL-1β) levels in rat serum, plasma, cell culture supernatants, body fluid and tissue homogenate. It is a Sandwich-ELISA for research use only and is not intended for therapeutic or diagnostic applications.

Principle

This ELISA kit uses Sandwich-ELISA as the method. The microelisa stripplate provided in the kit has been pre-coated with an antibody specific to IL-1β. Standards or samples are added to the appropriate microelisa stripplate wells and combined with the specific antibody. Then a horseradish peroxidase (HRP)-conjugated antibody specific for IL-1β is added to each well and incubated, and free components are washed away. The TMB substrate solution is added to each well: only those wells that contain IL-1β and HRP-conjugated IL-1β antibody appear blue in colour and then turn yellow after the addition of the stop solution. The optical density (OD) is measured spectrophotometrically at a wavelength of 450 nm. The OD value is proportional to the concentration of IL-1β, and the concentration in the samples is calculated by comparing the OD of the samples with the standard curve.

Kit components

Component 96 tests Storage
User manual 1 Room temperature
Closure plate membrane 2 Room temperature
Sealed bags 1 Room temperature
Microelisa stripplate 1 2-8 ℃
Standard: 108 pg/mL 0.5 mL × 1 bottle 2-8 ℃
Standard diluent 1.5 mL × 1 bottle 2-8 ℃
HRP-conjugate reagent 6 mL × 1 bottle 2-8 ℃
Sample diluent 6 mL × 1 bottle 2-8 ℃
Chromogen solution A 6 mL × 1 bottle 2-8 ℃
Chromogen solution B 6 mL × 1 bottle 2-8 ℃
Stop solution 6 mL × 1 bottle 2-8 ℃
Wash solution 20 mL (30×) × 1 bottle 2-8 ℃

Specifications

Parameter Value
Catalogue number SL0402Ra
Assay type Sandwich ELISA, quantitative
Detection method Colorimetric, HRP/TMB
Wavelength 450 nm
Assay range 1 pg/mL - 80 pg/mL
Sensitivity 0.1 pg/mL
Standard concentration 108 pg/mL
Standard curve points 108, 72, 48, 24, 12 and 6 pg/mL
Sample volume 10 μL of sample plus 40 μL of sample diluent (dilution factor 5)
Sample types Serum, plasma, urine, cerebrospinal fluid and pleuroperitoneal fluid, cell culture supernatant and tissue homogenate
Precision Intra-assay CV < 10 %; inter-assay CV < 12 %
Storage 2-8 ℃
Validity 6 months
Kit size 48 T / 96 T

Assay procedure summary

1. Dilute the standard with the standard diluent to obtain the concentrations 108, 72, 48, 24, 12 and 6 pg/mL; pipette 50 μL of each concentration into the microplate wells, using two wells per concentration.

2. Leave one well empty as the blank control. In the sample wells add 40 μL of sample dilution buffer and 10 μL of sample (dilution factor 5), load the liquid onto the bottom of the well without touching the wall and mix gently.

3. Seal the plate with the closure plate membrane and incubate for 30 min at 37 ℃.

4. Dilute the concentrated wash solution with distilled water (30 times for the 96 T kit and 20 times for the 48 T kit).

5. Peel off the closure plate membrane, aspirate the liquid and refill the wells with the wash solution; discard the wash solution after 30 s and repeat the washing 5 times.

6. Add 50 μL of HRP-conjugate reagent to each well except the blank control well.

7. Incubate as described in step 3 and wash as described in step 5.

8. Add 50 μL of chromogen solution A and 50 μL of chromogen solution B to each well, mix gently and incubate for 15 min at 37 ℃, protected from light.

9. Add 50 μL of stop solution to each well; the colour changes from blue to yellow.

10. Read the absorbance at 450 nm with a microtiter plate reader, setting the blank control well to zero. The reading has to be completed within 15 min after adding the stop solution.

Typical performance

Intra-assay precision (within one assay): three samples with low, middle and high level of rat IL-1β were tested 20 times on one plate; CV < 10 %.

Inter-assay precision (between assays): three samples with low, middle and high level of rat IL-1β were tested on 3 different plates with 8 replicates in each plate; CV < 12 %.

The standard curve is plotted with the known concentrations of the rat IL-1β standard on the x-axis and the corresponding OD readings on the y-axis. The concentration of the samples is read from the curve and multiplied by the total dilution factor. The diagram in the instruction manual is for reference only.

Ordering & shipping

  • Minimum order: 1 kit
  • Lead time: varies with order quantity and specifications. Please consult your local distributor or our sales team for confirmation
  • Payment: T/T 100% in advance; PayPal; Alibaba Trade Assurance
  • Shipping: FedEx / DHL / UPS express; cold-chain packing available on request
  • Price: USD, per kit (48T / 96T options available)

References (29)

Partial purchase records (13)

UsernameQuantitybought time
Na***42024-09-05
Za***32024-04-26
Vi***22023-09-14
Ha***12022-01-11
Ja***32021-11-16
Total 13 records, divided into3 pages. First Prev Next Last

Leave a message

* To protect against spam, please pass the CAPTCHA test below.

Newsletter

Sign up
0 0