Home > Sunlong Medical > HCP RD Kit > Sunlong Medical™ E. coli Host Cell Protein ELISA Kit (BL21)

Sunlong Medical™ E. coli Host Cell Protein ELISA Kit (BL21)

Sunlong Medical™ E. coli Host Cell Protein ELISA Kit (BL21)
Total $596

Product Summary

Alias:E. coli HCP BL21, Host Cell Protein

NO.:HCP108

LOD:1.56 ng/mL

LOQ:6.25 ng/mL

Storage:2-8℃

Validity:6 months

    Number:

Details

Sunlong Medical™ E. coli Host Cell Protein (HCP) G3 Residual Detection ELISA Kit (BL21(DE3), Two-Step)

For research use only. Not for use in diagnostic procedures.

1. APPLICATION

For the quantitative determination of host cell protein (HCP) residues of E. coli (BL21(DE3)) in protein purification processes and final products. Applicable strain: BL21(DE3). The kit is suitable for in-process and final-product samples and is intended for the monitoring of host cell protein clearance during downstream process development and quality control.

This kit is intended for the quantitative analysis of residual host cell protein (HCP) in protein drugs when E. coli (DE3) is used as the expression system.

2. PRINCIPLE

This kit is based on the solid-phase sandwich enzyme-linked immunosorbent assay (ELISA). A capture antibody is pre-coated onto the microplate to form the solid-phase antibody. During the assay, the antigen to be tested is first added to the coated wells and incubated. After washing, a horseradish peroxidase (HRP)-labeled detection antibody is added to form a capture antibody-antigen-detection antibody complex. After washing, unbound conjugates are removed, and the substrate TMB is added for color development. TMB is oxidized by HRP and turns blue, and then turns yellow in the presence of acid. The color intensity after oxidation is positively correlated with the total amount of the factor. The absorbance (OD value) is measured on a microplate reader at 450 nm, fitted against the concentration to construct a standard curve, and the sample concentration is calculated by substituting the sample OD value into the standard curve equation.

3. KIT SPECIFICATIONS

Sensitivity (LOD): 1.56 ng/mL

Limit of quantification (LOQ): 6.25 ng/mL

Assay range: 6.25 - 400 ng/mL (7-point standard curve, S1 = 400 ng/mL)

Sample volume: 100 μL per well

Assay type: solid-phase sandwich ELISA (two-step), read at 450 nm

Specificity: This assay recognizes E. coli host cell protein (HCP). The following proteins were assayed and exhibited no cross-reactivity or interference.

Sample Concentration
HEK293 HCP Not Detectable
CHO HCP Not Detectable
Pichia pastoris HCP Not Detectable
Ogataea polymorpha HCP Not Detectable
Saccharomyces cerevisiae HCP Not Detectable

Recovery: sample-matrix dependent; a spike recovery test is recommended when a different buffer is used for the first time, in order to exclude matrix interference effects; in practice, mix the diluted standard S1 (400 ng/mL) with the sample matrix at a 1:1 volume ratio

4. MATERIALS PROVIDED

For items that differ between the two kit sizes, values are given as 48 Test / 96 Test.

# Component Specification
1 Antibody-coated microplate (detachable) 48 wells / 96 wells
2 Standard stock solution (500 μg/mL) 30 μL / 50 μL
3 Detection Antibody stock (80×) 100 μL / 150 μL
4 TMB Substrate 10 mL
5 Stop Solution 10 mL
6 Wash Buffer Concentrate (20×) 10 mL
7 Diluent (10×) 10 mL
8 Plate Cover Seals -
9 Instructions -

5. ASSAY PROCEDURE SUMMARY

Step 1. Add 100 μL of each standard or sample to the appropriate wells; seal the plate and incubate at room temperature with shaking for 1.5 hours.

Step 2. Wash the plate 5 times with 1× Wash Buffer.

Step 3. Add 100 μL of 1× Detection Antibody; seal the plate and incubate at room temperature with shaking for 1.5 hours.

Step 4. Wash the plate 5 times, add 100 μL of TMB Substrate Solution and incubate for about 15 minutes at room temperature in the dark.

Step 5. Add 50 μL of Stop Solution and read the OD value at 450 nm.

6. TYPICAL DATA

standard curve

Appendix I: Example of a standard curve (schematic; for reference only).

Ordering & shipping

  • Minimum order: 1 kit
  • Lead time: varies with order quantity and specifications. Please consult your local distributor or our sales team for confirmation
  • Payment: T/T 100% in advance; PayPal; Alibaba Trade Assurance
  • Shipping: FedEx / DHL / UPS express; cold-chain packing available on request
  • Price: USD, per kit (48T / 96T options available)

Partial purchase records (0)

No one bought this product
Total 0 records, divided into1 pages. First Prev Next Last

Leave a message

* To protect against spam, please pass the CAPTCHA test below.

Newsletter

Sign up
0 0