Details
Sunlong Medical™ Sf9 Host Cell Protein (HCP) G3 Residual Detection ELISA Kit (Two-Step)
For research use only. Not for use in diagnostic procedures.
1. APPLICATION
For the quantitative determination of host cell protein (HCP) residues of Sf9 cells in protein purification processes and final products. Applicable cell lines: Sf9 and related cell lines. The kit is suitable for in-process and final-product samples from Sf9 expression systems, including purification intermediates and formulated products, and is intended for the monitoring of host cell protein clearance during downstream process development and quality control.
2. PRINCIPLE
This kit is based on the solid-phase sandwich enzyme-linked immunosorbent assay (ELISA). A capture antibody is pre-coated onto the microplate to form the solid-phase antibody. During the assay, the antigen to be tested is first added to the coated wells and incubated. After washing, a horseradish peroxidase (HRP)-labeled detection antibody is added to form a capture antibody-antigen-detection antibody complex. After washing, unbound conjugates are removed, and the substrate TMB is added for color development. TMB is oxidized by HRP and turns blue, and then turns yellow in the presence of acid. The color intensity after oxidation is positively correlated with the total amount of the factor. The absorbance (OD value) is measured on a microplate reader at 450 nm, fitted against the concentration to construct a standard curve, and the sample concentration is calculated by substituting the sample OD value into the standard curve equation.
3. KIT SPECIFICATIONS
Sensitivity (LOD): 1.56 ng/mL
Limit of quantification (LOQ): 6.25 ng/mL
Assay range: 6.25 - 400 ng/mL (7-point standard curve, S1 = 400 ng/mL)
Precision: intra-assay CV 4 - 6 %; inter-assay CV 2 - 7 %
Recovery: sample-matrix dependent; a spike recovery test is recommended when a new buffer system is used, mixing the diluted standard S1 (400 ng/mL) with the sample matrix at a 1:1 volume ratio
Specificity: antibodies are affinity-purified to remove non-specific antibodies and recognise Sf9 host cell protein with a coverage of more than 80 %
4. MATERIALS PROVIDED
For items that differ between the two kit sizes, values are given as 48 Test / 96 Test.
| # | Component | Specification |
| 1 | Antibody-coated microplate (detachable) | 48 wells / 96 wells |
| 2 | Standard stock solution (500 μg/mL) | 30 μL / 50 μL |
| 3 | Detection Antibody stock (100×) | 100 μL / 150 μL |
| 4 | TMB Substrate | 10 mL |
| 5 | Stop Solution | 10 mL |
| 6 | Wash Buffer Concentrate (20×) | 10 mL |
| 7 | Diluent (10×) | 10 mL |
| 8 | Plate Cover Seals | - |
| 9 | Instructions | - |
5. ASSAY PROCEDURE SUMMARY
Step 1. Add 100 μL of each standard or sample to the appropriate wells; seal and incubate for 1.5 hours at room temperature with shaking.
Step 2. Wash the plate 5 times with 1× Wash Buffer.
Step 3. Add 100 μL of 1× Detection Antibody; seal and incubate for 1.5 hours at room temperature with shaking.
Step 4. Wash the plate 5 times, add 100 μL of TMB Substrate Solution and incubate for about 15 minutes at room temperature in the dark.
Step 5. Add 50 μL of Stop Solution and read the OD value at 450 nm within 10 minutes.
6. TYPICAL DATA
Appendix I: Example of a standard curve (schematic; for reference only).
Ordering & shipping
Partial purchase records (0)
Leave a message
+86 0571 56623320
[email protected]
+86 18668110335

Scan Wechat Qrcode
