Details
| Medium | Special peptone: 23.0g, soluble starch: 1.0g, sodium chloride: 5.0g, agar: 10.0g, defibrinated sheep blood: 5% (added at 50℃), pH: 7.3±0.2 (25℃) |
| Growth Conditions | 37℃; 24-48h; Aerobic |
| Storage Conditions | 2-8℃ |
| Morphology | Colony diameter: 1-2mm, round, entire margin, opaque, grayish-white front, convex center, smooth surface, bright surface, moist texture, easy to pick, Gram-negative (red), rod-shaped bacteria, purity: pure |
| Procedure | Before use, please add anhydrous ethanol to Buffer GD and Wash Solution PW, referring to the bottle labels for volume; 1. Take 1-5ml of bacterial culture, centrifuge at 10,000rpm (11,500×g) for 1min, and carefully remove the supernatant; 2. Add 200μL Buffer GA to the bacterial pellet and vortex until thoroughly suspended. Note: For Gram-positive bacteria with tough cell walls, skip step 2 and add lysozyme solution for cell wall digestion. Specific method: Add 110μL buffer (20mM Tris, pH8.0; 2mM Na2-EDTA; 1.2% Triton) and 70μL lysozyme solution (50mg/mL, prepared by user, Cat. No.: RT401), incubate at 37℃ for over 30min. If RNA removal is needed, add 4μL RNase A (100mg/mL) solution (prepared by user, Cat. No.: RT405-12), vortex for 15sec, and let stand at room temperature for 5min; 3. Add 20μL Proteinase K solution to the tube and mix well; 4. Add 220μL Buffer GB, vortex for 15sec, incubate at 70℃ for 10min until the solution becomes clear, briefly centrifuge to remove water droplets from the tube cap. Note: White precipitate may form when Buffer GB is added, which usually disappears at 70℃ and does not affect subsequent experiments. If the solution does not become clear, cell lysis is incomplete, which may result in low DNA yield and impure DNA extraction; 5. Add 220μL anhydrous ethanol, vortex thoroughly for 15sec until well mixed, flocculent precipitate may appear, briefly centrifuge to remove water droplets from the tube cap; 6. Transfer the solution and flocculent precipitate from the previous step into a CB3 adsorption column (placed in a collection tube), centrifuge at 12,000rpm (13,400×g) for 30sec, discard the waste liquid, and place the CB3 adsorption column back into the collection tube; 7. Add 500μL Buffer GD to the CB3 adsorption column (check if anhydrous ethanol has been added before use), centrifuge at 12,000rpm (13,400×g) for 30sec, discard the waste liquid, and place the CB3 adsorption column back into the collection tube; 8. Add 600μL Wash Solution PW to the CB3 adsorption column (check if anhydrous ethanol has been added before use), centrifuge at 12,000rpm (13,400×g) for 30sec, discard the waste liquid, and place the CB3 adsorption column back into the collection tube; 9. Repeat step 8; 10. Place the CB3 adsorption column back into the collection tube, centrifuge at 12,000rpm (13,400×g) for 2min, discard the waste liquid. Let the CB3 adsorption column stand at room temperature for several minutes to thoroughly air-dry the residual wash solution in the adsorption material. Note: This step aims to remove residual wash solution from the adsorption column, as residual ethanol in the wash solution may affect subsequent enzymatic reactions (enzyme digestion, PCR, etc.); 11. Transfer the CB3 adsorption column into a clean centrifuge tube, add 50-200μL Elution Buffer TE dropwise to the center of the adsorption membrane, let stand at room temperature for 2-5min, centrifuge at 12,000rpm (13,400×g) for 2min, and collect the solution in the centrifuge tube. Note: The elution buffer volume should not be less than 50μL, as too small a volume affects recovery efficiency. The pH of the elution buffer significantly influences elution efficiency. If ddH2O is used as the eluent, ensure its pH is in the range of 7.0-8.5, as a pH below 7.0 reduces elution efficiency; store the DNA product at -20℃ to prevent degradation. To increase the yield of genomic DNA, the collected solution can be added back into the CB3 adsorption column, let stand at room temperature for 2min, and centrifuge at 12,000rpm (13,400×g) for 2min; |
| Sharing Method | Public welfare sharing |
? Notes:
Ordering & shipping
Partial purchase records (0)
Leave a message
+86 0571 56623320
[email protected]
+86 18668110335

Scan Wechat Qrcode
